New milestone in Lower Saxony!
Even after almost 30 years, we are still happy about every new installation. In Lower Saxony, another Antaris 12 kW wind turbine was successfully installed on a 12-metre-high mast – and without any procedures, without any building permit! The highlights at a glance: – Grid-parallel in a hybrid system with PV – Coupled to an […]
Wind power meets green passion – Antaris 5.5 kW now in use in Ireland
Ireland – known for its breathtaking landscapes and… strong winds! It is precisely these natural resources that our latest project uses: An Antaris 5.5 kW (D 4.40m) small wind turbine, installed on a 7.0 m tilting mast, now provides clean energy on the Emerald Isle. The system works in 1-phase parallel to the grid with […]
Joy of the wind – now also in Denmark!
It is with great pleasure that we are pleased to present another successful project: In Denmark, an Antaris 7.5kW wind turbine was installed on an 18 m high, hydraulically lowerable tubular mast – an impressive step towards sustainable energy! In combination with photovoltaics and the powerful FIMER PVS 10, the system works in an island […]
Our visit to Schleswig-Holstein!
The Antaris 12kW on an 18m high mast in SH. https://braun-windturbinen.com/…/antaris…/antaris-12-kw Currently, this wind turbine is running with the Smart!wind. The neighbor, however, receives the new Smart!wind+, the Antaris 12 is already installed. https://smart-power-electronics.de/smartwind Do you have any questions or would you like to know more about the Antaris 12 kW? We will be happy […]
The summer break is over!
With a breath of fresh air on the repeller, the installations continue. Some of them are posted here. Currently it is the installation of the Antaris 12 kW on an 18m mast in SH. And yes, now both neighbors have their Antaris 12 kW wind turbines at the start and are happy about the kWh […]
The ANTARIS 2.5 in Spitsbergen
The two ANTARIS 2.5 kW supply the research station in Spitsbergen with wind power. https://www.awi.de/…/stationen/awipev-forschungsbasis.html https://braun-windturbinen.com/…/antari…/antaris-2-5-kw The built-in inverter is the 1-phase UNO 3.3 from FIMER: https://braun-windturbinen.com/produkte/wind-wechselrichter If you have any questions about the project, please contact us, we will be happy to advise you. Joy of the wind with ANTARIS wind turbines!
And we continue with the ANTARIS 10 kW in France
Here, the Antaris 10 kW is built on a 12m high hydraulic tilting mast. The mast was designed by our distributor in FR: https://www.diwatt.fr/. The guys also did the complete installation, thanks for that. The wind turbine works in 3-phase parallel to the grid with the Smart!wind SW10. Since the inverter has been discontinued, the […]
And again an Antaris installed!
The Antaris 7.5 kW (https://braun-windturbinen.com/…/antari…/antaris-7-5-kw/) works here on a 19 m mast in Lower Saxony. A special feature here is the on-site hydraulic tilting mast. Respect for that, you can feel the enthusiasm for the project. The Antaris 7.5 works in 3 phases parallel to the TRIO 7.5. The usual safety parameters are as follows: […]
The Antaris 3.5 in France!
Here, the Antaris 3.5 kW works on a 12m high tilting mast. The wind turbine works in 1-phase parallel to the grid with the UNO 4.0 kW, in a hybrid system with a PV system. The installation was carried out by our distributor for FR: https://www.diwatt.fr/ If you have any questions about the project, please […]
The Rhine-Voreifel Climate Region has inaugurated its new project!
Numerous visitors from the region attended the ceremonial appointment of the KlimaPaten 2018 . Our customer has made a significant contribution with the construction of its ANTARIS 10 kW small wind turbine on a 24m mast, with a project that is rather unusual for the project group. But take a look for yourself:https://www.klima-rv.de/ Documentation ANTARIS […]