Skip to main content

BRAUN Windturbinen GmbH

Heating operation with wind power

ANTARIS – Wind heating: clean and cost-effective! 3.5 kW to 10.0 kW (max. 12.0 kW). This control system is a control electronics with wind characteristic curve guidance...

Grid-parallel operation

Our Power One and Smart!wind grid inverters are efficient inverters for small and very small wind turbines for grid feed-in and for use in the off-grid grid...

Wind power in island operation

Off-grid inverters – system manager of a self-sufficient energy supply. With the ANTARIS wind turbine, you can switch to an off-grid power supply...

Why an ANTARIS
Small wind turbine

ANTARIS wind turbines are the best-selling small wind turbines in Germany!

Quality work from our own production, “Made in Germany”
Based on the DIN EN 61400-2 and UK-MCS list:

  • Transition Product 569 ANTARIS 2.5 kW
  • Transition Product 570 ANTARIS 3.5 kW
  • Transition Product 682 ANTARIS 5.5 kW
  • Transition Product 472 ANTARIS 7.5 kW
  • Transition Product 985 ANTARIS 10.0 kW

Incl. official country approval for Denmark!

Small wind turbines for domestic use are also known as micro wind turbines or micro wind turbines. The classification of the classes is not uniform, mainly a distinction is made according to performance. According to this, wind turbines can be divided into micro wind turbines (up to 1.5 kW), domestic wind turbines (up to 6.5 kW) and small wind turbines (up to 200m² repeller area).

ANTARIS Locations

These are just a few of the ANTARIS locations with an approximate location.

ANTARIS Key Figures

Sold ANTARIS systems
> 1
Countries
> 1
satisfied customers
> 1 %

Braun Windturbinen GmbH:

Pioneering work for a sustainable energy future

Braun Windturbinen GmbH, a leading company in the field of small wind energy, is pleased to announce its latest developments and initiatives to promote renewable energies.
With a clear focus on innovation and sustainability, the company has established itself as a pioneer in the wind power industry.

In recent years, Braun Windturbinen GmbH has made significant progress in the development of efficient and powerful small wind turbines.
Our latest models in the ANTARIS series are characterized by improved energy yield and reduced environmental impact.
By using state-of-the-art technologies and materials, we set new standards in the industry.

“We are proud to be making a contribution to the energy transition and reducing dependence on fossil fuels,” says Rüdiger Braun, Technical Director of Braun Windturbinen GmbH.
“Our mission is to provide clean and sustainable energy for future generations.”

In addition to product development, Braun Windturbinen GmbH is also actively involved in research and development.
In collaboration with leading universities and research institutions, we are working on innovative solutions to further increase the efficiency and reliability of our wind turbines.

In addition, the company is committed to promoting education and awareness in the field of renewable energy.
Through various initiatives and programs, we aim to spark interest in sustainable technologies and inspire the next generation of engineers and scientists.

Braun Windturbinen GmbH is convinced that the future of energy supply lies in the use of renewable resources.
We invite all interested parties to find out more about our products and initiatives and to work together with us on a sustainable energy future.

For further information, press inquiries or interviews, simply send us a short message.

ANTARIS DIY Kits

ANTARIS DIY Kits

DIY kit for ANTARIS small wind turbines

  • Windinverter Smart!wind and FIMER UNO/TRIO from 2.0 – 10.0 kW; incl. parameter service for your wind site!
    All inverters and generators are electrically matched to each other.
    Top price offers, we will be happy to advise you in detail!
  • Surge protection for all Power One inverters incl. dumpload and wind turbine control, up to 10.0 kW!
  • Permanent magnet generators for small wind turbines from 1.0 – 20.0 kW for battery charging, grid-parallel operation, heating support, also suitable for self-built hydropower plants.
  • New! PMG ́s as low-speed machines with 2.5 kW; 125 VDC at 50 rpm! New!
  • Helicopter fuses for retrofitting small wind turbines from 1.0 – 10.0 kW
  • Rotor blades for repeller diameter. from 1.15m – 6.50m
  • Controls for heating operation (wind turbines with 40 – 400VDC voltage)
  • Battery Charge Controller for 24V / 48VDC … Voltage
  • Controllers for grid-parallel operation
  • Hubs and spinners

Further information on the self-construction of small wind turbines and CHP plants can be found here…

Please inquire about prices!

DIY kit for CHP

  • Permanent magnet generators from 1.5 – 20.0 kW mains parallel operation
  • Power One and Smart!wind surge protection with control for mains parallel operation with permanent magnet generator; pre-assembled ready to plug in;
  • a 230V/ 380V socket is sufficient for feed-in
  • Low-speed control system with control electronics for conversion from stand-alone to grid-parallel operation

Further information on the self-construction of small wind turbines and CHP plants can be found here…

Please inquire about prices!

Since we manufacture the permanent magnet generators to order, individual customer requests are taken into account at short notice!

ANTARIS news

When the wind becomes your own source of energy!

An impressive picture from Schleswig-Holstein:Our ANTARIS 7.5 kW on an 18-metre-high telescopic mast – ready to convert the power of the wind into valuable electrical energy.Particularly pleasing:Although the ANTARIS wind turbine reaches a mast height of 18 m and a total height of 21.50 m, no building permit is required for this installation as the telescopic mast is mobile. Especially in autumn and winter, it becomes clear what makes wind energy so special.When the days get shorter, the heating systems

Continue reading...

Antaris wind turbines simply explained

How does an ANTARIS small wind turbine actually work? How does wind become usable electricity and what does the turbine do in strong winds? In our presentation, we explain the technology behind the ANTARIS wind turbines (2.5-12 kW) in a clear and understandable way – from the rotor and generator to the inverter and the various safety functions. We also provide insights into our production in Germany, the different mast variants and international projects. Discover how wind becomes energy –

Continue reading...

With passion and heart and soul: Antaris Wind Energy in action!

Our customers install their Antaris wind turbines with real enthusiasm – just like here in Hesse, where an Antaris 5.5 kW is now working in three phases and parallel to the grid. The darker season is just around the corner. It is precisely then that the value of wind energy becomes apparent: When the sun shines less, the wind can make an important contribution to the energy supply. Security of supply all year round. A topic that is more important

Continue reading...