ANTARIS 12.0kW

Technical data ANTARIS 12.0 kW

Start of feed-in at 2.5 m/s wind speed after start-up, depending on the repeller. Wind turbine especially for inland locations with weak to moderate wind conditions. From an average wind speed of more than 6.0 m/sec., a repeller with a diameter of 5.8 m is used.

Generator

Permanent magnet rotor, brushless, gearless, maintenance-free
High efficiency due to extremely strong permanent magnets (NdFeBo permanent magnets, temperature resistant up to 150°)
Special ball bearings for safe absorption of radial and axial forces
3-phase three-phase current
Separate rectifier
Direction of rotation arbitrary
Voltage 0-1000 VDC
Start of feed-in at approx. 65 rpm
Power: 12,000 watts at 255 rpm & 500 VDC
Evenly increasing power curve
Weight: 160kg
Aluminum housing, surface cooling, foot mounting
IP56 protection

Rotor

Hub connection with aluminium flange and pressure washer
Stainless steel screw connections with locking nuts
3 rotor blades made of fiberglass / carbon fiber laminate
Computer-aided aerodynamic profile, hand-laminated, with edge protection
Noise minimization due to winglets on the blade tips
approx. 6.50 m diameter (optionally 5.80 m > 6.0 m/s average wind speed)
Single sheet weight: approx. 14.0 kg
dynamically and statically balanced
Direction of rotation front “right”
Speed max. 255 rpm.
GRP Spinner Cap
Rotor colour according to customer requirements

Load-bearing element

Wind vane (weather-resistant HDPE “natural white”, slightly transparent)
Stainless steel tube square as a load-bearing element
All screw connections in stainless steel and equipped with locking nuts
Steel sole as a supporting element for generator, intended as a plug connection with yaw plain bearing, completely galvanized
Patented helicopter safety device
Pole adapter with flange connection (pipe 220mm)