Here is another installation in Lower Saxony
15m total height is procedure-free in NS. The Antaris 7.5 kW is here on a 12m tipping machineten installed. The wind turbine works with the TRIO 7.5 from FIMER in 3-phase parallel to the grid. (https://braun-windturbinen.com/produkte/wind-wechselrichter/) https://braun-windturbinen.com/…/antari…/antaris-7-5-kw Wind monitoring via PLC, as well as V DC monitoring and helicopter function keep the Antaris safe in […]
ANTARIS wind turbines, built to meet the highest demands!
The ANTARIS 12 kW is installed here on a 12m tilting mast, procedure-free in Lower Saxony. https://braun-windturbinen.com/…/antaris…/antaris-12-kw The wind turbine works in 3-phase parallel to the PVS 10 kW from FIMER, here is the link: https://www.fimer.com/…/dreiphasige…/pvs-1012515-tl The usual safety parameters for the Antaris 12 are as follows: PLC wind, V DC monitoring, helicopter function. In […]
In Belgium, they are happy about 3 more ANTARIS 7.5 kW small wind turbines
Almost shortly before the approaching winter, 3 pieces of ANTARIS 7.5 kW were installed in Belgium at Renson (http://www.renson.de/renson-3.html).The turbines were built on an 11 m high hall roof .The substructure is a construction of T-beams, the masts are each a guyed 9.0 m high tipping mast.The turbines all work in 3-phase parallel to the […]
ANTARIS 6.5 kW in Saxony, rather wind power than lignite!
Even if the authorities took some time… The ANTARIS small wind turbine works here on a 15 m high tubular mast in 3-phase parallel operation with heating support.Primarily the mains operation was set to 3.5 kW , excess energy is dissipated to the 6.0 kW heating element for domestic water heating .Thus, the customer has […]
2. ANTARIS supplies greenhouse from the Schenck nursery
The 1st turbine (Antaris 3.5 kW) was already built in 2009, which is now being reinforced by the Antaris 4.5 kW.Due to the rather moderate wind conditions in the Frankfurt area, the 4.5 turbine has the larger low-wind repeller with D5.3 mBoth systems work parallel to the grid with the good old Windy Boys to […]
Mounting setup of the ANTARIS 6.5 kW, 3-phase grid-parallel / heating in Schleswig-Holstein
The ANTARIS is built here on a 21 m high tubular mast (wind zone 4). The system was installed by our local partner, the company Elektro Röhe GmbH & Co. KG. This is the 1st plant in SH in 2015, 10 more are planned for this year in SH or partly already approved. The next […]
ANTARIS 6.5 kW with power overview 3-phase mains-parallel / heating
Below is an overview of the maximum turbine output in 2014 at a hub height of 18 m, normal location in central Germany. Remarkable: – It is a 6.5 kW system with a nominal power of 7.5 kW. – The maximum power is usually around 15,000 W. – In December 2013, a maximum value of […]
ANTARIS horizontal vs vertical!
Again, a vertical axle was dismantled and exchanged for an ANTARIS 6.5 kW.For the first time, the customer can now see what is possible and the greater the joy of electricity production.The ANTARIS 6.5 kW works here parallel to the grid and in heating mode with a 6.0 kW heating element.It is also possible to […]
The ANTARIS 4.5 kW in Portugal
The small wind turbine operates 3-phase grid parallel in the sun-kissed land on a 12 m high lattice tower.In the years 2009 – 2014 were about 85 pcs. ANTARIS small wind turbines in the power range from 2.5 kW – 4.5 kW built.All systems work parallel with the grid. Formerly with the Windy Boy, currentnow […]
The ANTARIS 4.5 kW in Portugal
The small wind turbine works in the sun-drenched country on a 12 m high lattice mast in 3-phase parallel to the grid.In the years 2009 – 2014, approx. 85 pcs. ANTARIS small wind turbines in the power classes from 2.5 kW – 4.5 kW .All systems work parallel to the grid. Formerly with the Windy […]