Skip to main content

BRAUN Windturbinen GmbH

Discover the efficient small wind turbines from BRAUN Windturbinen GmbH

Welcome to BRAUN Windturbinen GmbH – your expert for high-performance small wind turbines “Made in Germany”. Our ANTARIS wind turbines in the power classes 2.5 kW, 3.5 kW, 7.5 kW and 12.0 kW offer you an ideal solution for sustainable energy generation directly at home or in the garden.

Benefit from innovative technology, tailor-made advice and support in official approval procedures. Whether as a ready-made system or as a kit for self-assembly – we offer you the perfect system for your individual needs.

Heating mode

In wind power heating mode, the energy generated is used directly to operate electric heating systems, such as heat pumps or electric heaters. The wind turbine provides the electricity needed to meet the heating needs of a building, saving fossil fuels and reducing energy costs.

Grid-parallel operation

In grid-parallel operation, the energy generated by the wind turbine is fed into the public power grid, while at the same time self-consumption is covered. Surplus electricity is fed into the grid, for which the operator receives a feed-in tariff. This enables efficient use of wind power and ensures a stable power supply.

Island operation

In island operation, the wind turbine is operated completely autonomously, without a connection to the public power grid. The energy generated is used exclusively on site, often in combination with a battery storage system to ensure a continuous power supply even when there is no wind. This mode of operation is particularly suitable for remote areas or houses that are not connected to the power grid.

Your wind power solution for home and garden – flexible and efficient

Our small wind turbines of the ANTARIS series offer you a cost-efficient way to generate electricity yourself. The models are specially designed for use in private households and gardens and are characterized by their high efficiency, reliability and durability. Rely on a green energy source and reduce your electricity costs – with a wind turbine that has been specially optimized for use in residential areas.

Weltweit im Einsatz - Die ANTARIS Standorte

These are just a few of the ANTARIS locations with an approximate location.

Die Vorteile der ANTARIS Kleinwindkraftanlagen im Überblick

ANTARIS - The best-selling small wind turbines worldwide

Sold ANTARIS systems
> 1
Countries
> 1
satisfied customers
> 1 %

Made in Germany – Trust in quality and innovation

BRAUN Windturbinen GmbH produces all wind turbines in Germany – with the highest precision and innovative technology. Our products meet the highest quality standards and offer you a reliable power supply for many years. With our expertise and experience, you can be sure that you will receive a durable and powerful small wind turbine.

Regulatory Approval Support – We're Here to Help

The installation of a small wind turbine often requires official approval. We at BRAUN Windturbinen GmbH support you not only with the purchase of your wind turbine, but also with the entire approval process. Our team of experts will help you to take all the necessary steps and obtain the permit quickly and easily.

FAQ for small wind turbines - The most frequently asked questions

A small wind turbine uses the energy of the wind to generate electricity. This energy is converted into electrical energy via a wind turbine, which can be used directly on site or fed into the power grid.

The right size depends on your energy needs. Our models offer power classes from 2.5 kW to 12.0 kW – ideal for private households and gardens. Our experts will be happy to help you choose the right system.

Our wind turbines can be installed by professionals or as part of a self-construction. We offer you the necessary support in planning and installation.

In many cases, an official permit is required, but in some federal states there are special subsidy programs or simplified approval procedures for smaller wind turbines, especially for their own use.
These often include:

  • Facilitated building permit for smaller installations (e.g. less than 10 metres high or below a certain capacity).

  • Less extensive environmental assessments if the wind turbine is installed in less sensitive areas.

  • Promotion of wind power projects as part of state-wide climate protection programs.

We will help you through the entire approval process so that the installation of your wind turbine goes smoothly.
However, we will be happy to advise you on this topic.

Our small wind turbines are designed for a long service life and offer you reliable power supply for many years.

Yes, our wind turbines are also available as a kit. We offer you detailed instructions and the necessary support so that you can build your own wind turbine yourself.

The amount of electricity generated depends on the size of the wind turbine and the wind conditions on site. However, with our powerful models, you can cover a significant part of your electricity needs.

Why should you choose a small wind turbine from BRAUN?

The ANTARIS small wind turbine as a DIY kit - What is included?

Our small wind turbines are designed for a long service life >of 20 years and offer you reliable power supply for many years.

  • FIMER UNO / TRIO wind inverter from 2.0 – 10.0 kW; incl. parameter service for your wind site!
    – All inverters and generators are electrically matched to each other –

  • Surge protection for all FIMER inverters incl. dumpload and wind turbine control, up to 10.0 kW

  • Permanent magnet generators for small wind turbines from 1.0 – 20.0 kW for battery charging, grid-parallel operation, heating support, also suitable for self-built hydropower plants.

  • Helicopter safety devices for retrofitting small wind turbines from 1.0 – 10.0 kW

  • Rotor blades for repeller diameters of 3.00m – 6.50m

  • Controls for heating operation (wind turbines with 40 – 400VDC voltage)

  • Battery charge controller for 24V / 48VDC voltage

  • Controllers for grid-parallel operation

  • Hubs and spinners

    Top price offers – we will be happy to advise you in detail!

ANTARIS Small Wind Turbines - Power Levels & Models

ANTARIS 2.5 kW

For beginners or mobile care

The ANTARIS 2.5 kW wind turbine has a maintenance-free, brushless permanent magnet generator with high efficiency and a voltage of 0-400 V. The nominal power of 2,700 watts is achieved at 380 rpm. The rotor has a diameter of 3 m and is made of fiberglass-reinforced laminate with an aerodynamic profile and noise minimization by winglets. The support element is made of weather-resistant HDPE and stainless steel, with a storm protection and a helicopter system. The control cabinet contains 3-phase voltage monitoring and allows 1-phase grid-parallel operation.

ANTARIS 3.5 kW

Perfect for the family home

The maintenance-free wind turbine with permanent magnet generator delivers 3700 W at 420 rpm and 400 VDC. The 3.50 m rotor (optionally 3.00 m) made of fiberglass/carbon fiber laminate minimizes noise.

The supporting element consists of a weatherproof wind vane and a galvanized steel console with azimuth plain bearing. Storm protection is provided by helicopter position and generator short circuit.

The control cabinet offers voltage monitoring, mains parallel operation and emergency stop switch. Optionally available as a 48 VDC battery charger with 3000 W.

ANTARIS 5.5 kW

Ideal for home and yard

The ANTARIS 5.5 kW delivers up to 6000 W at 380 rpm and 400 VDC. The maintenance-free permanent magnet generator with 3-phase three-phase current starts the feed-in from approx. 100 rpm.

The rotor (4.00 m, optionally up to 5.30 m) made of carbon minimizes noise thanks to optimized blade design. The galvanized supporting element with wind vane and azimuth plain bearing ensures stability.

Helicopter position, generator short circuit and brake resistor are used to protect against storms. The control cabinet offers 3-phase voltage monitoring, mains parallel operation and a display display.

Optionally available as a 48 VDC battery charger with 4000 W.

ANTARIS 7.5 kW

The wind turbine for medium applications

The wind turbine is optimized for inland locations and starts feeding at 2.5 m/s wind speed. It reaches 7500 W at 330 rpm and 400 VDC.

The maintenance-free permanent magnet generator delivers 3-phase three-phase current with a uniform power curve. The rotor (5.30 m, optional 4.40 m) made of fiberglass/carbon fiber laminate minimizes noise and is aerodynamically optimized.

The galvanized support element with wind vane and azimuth plain bearing offers a robust construction. The storm protection includes helicopter position, generator short circuit and brake resistance.

The control cabinet has 3-phase voltage monitoring, mains parallel operation, emergency stop switch and a display display.

ANTARIS 12.0 kW

For maximum performance in the small wind range

The ANTARIS 12.0 kW wind turbine is also optimized for inland locations and starts feeding in from 2.5 m/s wind speed. It reaches 12,000 W at 255 rpm and 500 VDC.

The maintenance-free permanent magnet generator delivers 3-phase three-phase current with high efficiency. The rotor (6.50 m, optional 5.80 m) made of fiberglass/carbon fiber laminate minimizes noise due to winglets and aerodynamic design.

The galvanized supporting element with wind vane and azimuth plain bearing ensures stability. The storm protection includes helicopter position, generator short circuit and temperature monitoring.

The control cabinet offers 3-phase voltage monitoring, mains parallel operation, emergency stop switch and a display display.

The wind sends
no invoice!

Request your small wind turbine now - free of charge and without obligation

* Required field

Genehmigungen für Kleinwindkraftanlagen in Deutschland

In Germany, the installation of small wind turbines is generally subject to approval, although the exact requirements may vary depending on the federal state and local planning law. A permit is necessary to ensure that the wind turbine does not have a negative impact on the environment, landscape or adjacent buildings. In this context, both building law and nature conservation requirements must be observed.

1. General requirements for approval

The approval requirement for a small wind turbine results from the Building Code (BauGB) and the Renewable Energy Sources Act (EEG). For the installation of a wind turbine, the following steps must usually be considered:

  • Building permit: A building permit is required if the wind turbine is installed as a structural modification on a property. This permit is usually applied for at the responsible building supervisory authority of the respective district or city.

  • Examination under nature conservation law: In many cases, an examination is also carried out with regard to possible impairments of nature and landscape protection. This includes, among other things, bird and bat reports that clarify whether the wind turbine will be erected in a sensitive nature reserve or near breeding grounds.

  • Assessment under immission control law: It is examined whether the operation of the wind turbine has harmful effects on the environment (e.g. noise, shadows).

2. Differences between the federal states

Although there is a uniform legal framework throughout Germany, there are differences in the requirements and processes for approving a small wind turbine, depending on the respective federal states. Some federal states have specific regulations or facilitate certain approval procedures.

In Bavaria and Baden-Württemberg, the roof ridge is considered the so-called zero point when the mast is guided through the roof. Thus, with a roof height of 10m, a 25m high ANTARIS small wind turbine would be procedure-free.

In Baden-Württemberg, small wind turbines must generally be subject to a building permit , especially if the turbine exceeds a height of 15 meters or the output is more than 1 kW. In some cases, smaller installations may also be subject to simplified permitting procedures . In addition, environmental and nature conservation assessments are required if the wind turbine is erected in a nature reserve or near flora-fauna-habitat areas (FFH).

In Bavaria, a small wind turbine up to a total height of 15m (repeller above) is procedure-free.

In Bavaria and BW, the roof ridge is considered a so-called zero point when the mast is routed through the roof. Thus, with a roof height of 10m, a 25m high ANTARIS small wind turbine would be procedure-free.

In addition, a building permit is required, and nature conservation authorities play a central role in assessing environmental impact. In addition, there are additional regulations in some regions that restrict or complicate the installation of wind turbines, especially in mountainous areas and nature reserves.

In North Rhine-Westphalia, wind turbines with a height of more than 10 meters must also receive a building permit from the responsible building authority. The immission control test is particularly important here in order to check the effects of noise and shadow impact. Nature conservation audits are often necessary in NRW, especially if the wind turbine is to be installed in a nature park or protected area.

In Hesse, a building permit is usually required for small wind turbines. Depending on the region, different requirements must be taken into account with regard to noise measurement and shadow impact . In more rural areas, permitting practices tend to be less stringent, but environmental assessments must also be provided if the wind turbine is installed in a sensitive area.

In Lower Saxony, a small wind turbine up to a total height of 15m (repeller above) is procedure-free.

The same requirements apply here as in many other federal states, but the approval practice for wind turbines is often less restrictive here, as the state offers great potential for wind power use.

Small wind turbines that are less than 20 meters high can often obtain a simplified building permit . However, if the wind turbine is erected in a nature reserve or near agricultural land, environmental and nature conservation assessments are necessary.

In Saxony, all wind turbines that reach a height of more than 10 meters must apply for a building permit. In addition, an immission control test is required in many cases, especially in urban areas. There are special regulations for the use of wind in nature reserves and in mountainous areas.

Brandenburg has very generous regulations for the use of wind power in many rural regions. A building permit is required here, but there are many areas where additional nature conservation assessments are not required due to lower potential for conflict. However, strict approval processes are required in nature reserves.

In Mecklenburg-Western Pomerania, wind turbines that exceed a certain size must also be approved. Approval is granted by the building supervisory authority, and expert opinions on noise, shadows and nature conservation aspects must be submitted. In areas of special nature conservation value, additional requirements must be observed.

In the big cities such as Berlin and Hamburg, the permit requirements tend to be stricter. Often, both immission control reports and bird protection reports are required. Small wind turbines in urban areas must meet the requirements for sound insulation and visual protection. In urban environments, they are less common, but still possible if the legal requirements are met.

In Schleswig-Holstein, a small wind turbine up to a total height of 15m (repeller above) is procedure-free.

For further information, please contact us directly and up-to-date.

3. Simplified approval processes for small wind turbines

In some federal states, there are special subsidy programs or simplified approval procedures for smaller wind turbines, especially for their own use. These often include:

  • Facilitated building permit for smaller installations (e.g. less than 10 metres high or below a certain capacity).

  • Less extensive environmental assessments if the wind turbine is installed in less sensitive areas.

  • Promotion of wind power projects as part of state-wide climate protection programs.

4. Conclusion

The approval of a small wind turbine is a complex process that can vary from state to state. It is therefore advisable to obtain comprehensive information from the competent authority or a specialist lawyer before installation. Proper planning and timely obtaining of all necessary permits can minimize legal hurdles and successfully implement the project.

For the specific permit, it is always advisable to contact the local authorities and, if necessary, BRAUN Windturbinen GmbH, as additional requirements may exist depending on the location and type of turbine.

Due to the constantly changing regulations of permits for small wind turbines, we ask you to contact us either (by phone or email) or directly to the responsible local office in your region.

Note: We do not accept any liability for the information provided here.
The obligation to provide information lies with you and is best obtained in writing from the building authority responsible for your location.

ANTARIS news

With passion and heart and soul: Antaris Wind Energy in action!

Our customers install their Antaris wind turbines with real enthusiasm – just like here in Hesse, where an Antaris 5.5 kW is now working in three phases and parallel to the grid. The darker season is just around the corner. It is precisely then that the value of wind energy becomes apparent: When the sun shines less, the wind can make an important contribution to the energy supply. Security of supply all year round. A topic that is more important

Continue reading...

ANTARIS 12 kW in Wales – reliable wind energy for agriculture!

Once again, it shows how versatile our ANTARIS small wind turbines are in use worldwide. This time the way leads us to Wales in Great Britain. There, an ANTARIS 12 kW on a 12 m high tilting mast supports an agricultural business in its own energy supply. The turbine operates in three phases parallel to the grid with the Smart!wind+ and the SMA Sunny Tripower 10 kW – a proven combination for reliable and efficient feed-in of the wind energy

Continue reading...

Wind and sun for the future – the Montessori School and its ANTARIS small wind turbines

Sometimes you don’t have to talk about the energy transition for a long time. You just have to do it.That’s exactly what happens here in Bavaria. At the Montessori School, two ANTARIS small wind turbines, each with 5.5 kW on 12 m high tilting masts, were erected without any procedures. Together with the existing photovoltaic system, a true hybrid system is created, in which wind and sun together supply energy.And it is precisely this combination that makes sense.When the sun

Continue reading...