Here the ANTARIS 12 kW works on a 30m high tubular mast in Bavaria.
These masts are specially manufactured for hilly inland locations, such as in Bavaria.
The mast statics and the foundation plan both contain verifiable documents.
The system works here in 3-phase parallel to the grid with the Smart!wind SW10.
Excess energy is dissipated via 2 pieces of 6.0 kW brake resistors.
The following parameters are monitored for system safety: V DC, RPM, wind speed.
In addition, the Antaris wind turbine is completely shut down during the shutdown or braking process via a “braking box” after reaching 50rpm.
This prevents a new start in braking mode, e.g. in the event of a hurricane.
The system was electrically installed by Elektro Ecker in Landshut; https://www.elektroecker.de/
The customer has taken over the installation of the system and mast himself, respect and recognition for this.
If you have any questions about the project, please give us a call!
Joy of the wind with ANTARIS wind turbines.
