BRAUN Windturbinen GmbH

The ANTARIS 9.5 kW, the new flagship of the ANTARIS series

The plant works with a Repeller D 6.50 m on a 24 m tubular mast. The generator is an 18.0 kW machine, quality “Made in Germany”.Installed in northern NRW by our local partner:http://www.kroeger-systemtechnik.de/ The system works in 3-phase parallel to the grid / heating mode, with a Smartwind 10.0 kW.https://www.braun-windturbinen.com/produkte/antaris-kleinwindanlagen/antaris-9-5-kw/If you have any questions about […]

ANTARIS 6.5 kW with power overview 3-phase mains-parallel / heating

Below is an overview of the maximum turbine output in 2014 at a hub height of 18 m, normal location in central Germany. Remarkable: – It is a 6.5 kW system with a nominal power of 7.5 kW. – The maximum power is usually around 15,000 W. – In December 2013, a maximum value of […]

The 10th ANTARIS for 2014 in France

ANTARIS small wind turbines, the 10th ANTARIS for 2014 in France! The ANTARIS 6.5 kW works here exclusively in heating mode. The turbine site is close to Normandy, the hub height is 18 m. The mast can be tilted hydraulically, this saves the lift for a later visual inspection. Joy in the wind, with ANTARIS […]

ANTARIS horizontal vs vertical!

Again, a vertical axle was dismantled and exchanged for an ANTARIS 6.5 kW.For the first time, the customer can now see what is possible and the greater the joy of electricity production.The ANTARIS 6.5 kW works here parallel to the grid and in heating mode with a 6.0 kW heating element.It is also possible to […]