And it continues in Schleswig-Holstein
Here the Antaris 5.5 kW with the repeller D4.40m on a 9.20m tilting mast. The Antaris works here in 3-phase parallel to the grid with the TRIO 5.8 from FIMER. Our customer fought bravely for 1.5 years for his building permit. And yes, almost exactly to the day with the commissioning of the wind turbines, […]
Let’s continue with the installations – this time in NL
Here the Antaris 5.5 kW with the repeller D4.40m https://braun-windturbinen.com/…/antari…/antaris-5-5-kw The wind turbine is installed on a 12m high lattice mast. The mast can be tilted on site and via the jut tree. The Antaris 5.5 works in 3-phase parallel to the TRIO 5.5. The Antaris serves as a student project here: https://www.hanze.nl/de The installation […]
Assembly setup of the Antaris 5.5 kW in Lower Saxony!
Here the Antaris 5.5 kW was installed on the 12m high wooden mast “Dali Tower”. The wind turbine could be set up without any procedure, as no building permit is required in NS up to 15m total height (repeller sheet above). The Antaris 5.5 works here in 3-phase parallel to the grid with the FIMER […]
Funding for small wind turbines by the Federal Ministry
Federal Ministry of Food and Agriculture also supports small wind turbines in the field of agriculture and horticulture! Take advantage of the opportunity of 40% funding until 30.06.2021. If you have any questions about the project, please call here! https://braun-windturbinen.com/kontakt/ Joy of the wind with ANTARIS wind turbines. Directive-Funding-Energy-Efficiency-2020-1
The Rhine-Voreifel Climate Region has inaugurated its new project!
Numerous visitors from the region attended the ceremonial appointment of the KlimaPaten 2018 . Our customer has made a significant contribution with the construction of its ANTARIS 10 kW small wind turbine on a 24m mast, with a project that is rather unusual for the project group. But take a look for yourself:https://www.klima-rv.de/ Documentation ANTARIS […]
ANTARIS wind turbine meets New Energy trade fair in Husum
This year, the ANATARIS wind turbine was once again a magnet for trade fair visitors.An unexpectedly large number of interested parties came to the trade fair stand for technical discussions.Most of them were already familiar with the facility and were able to convince themselves of the quality “Made in Gemany” on site.Overall, we draw a […]
Just in time for the cold season, the installation of the ANTARIS 7.5 kW is completed
The 7.5 mm small wind turbine works here on an 18 m high tubular mast in 3-phase parallel to the gridand additionally to a 6.0 kW heating element. The grid power was limited to 2.5 kW here.If the system produces more power than the 2.5 kW, this is moved to the 6.0 kW heating element.The […]
The next ANTARIS 4.5 kW for clean electricity and heat
The 4.5 kW system works in 3-phase parallel to the grid with a set base load of 2.0 kW for the household electricity consumption.If the system produces more energy than the set grid capacity, it is transferred to a 6.0 kW heating element for domestic water heating .Thus, the customer has almost 100% self-consumption, even […]
ANTARIS small wind turbines – free wind power for house and yard
Below are the yield overviews from 11.2015 of 2 ANTARIS turbines with 6.5 kW and 9.5 kW nominal power each.In the case of the 9.5 system, the yields from Energy Net (blue, house network) and Energy Chopper (red, heating element) must be added.The yields from the 2nd heating element are not visible, but amount to […]