Successful installation of the Antaris 12 kW in Saxony on a 24m mast!
In the Free State of Saxony, the Antaris 12 kW now stands on an impressive 24m mast! The installation was carried out in-house by our customer, Seilerei Voigt. Respect and recognition for that! Here you can find more information about the Voigt rope factory: https://www.seilerei-voigt.de The Antaris 12 kW works here in 3-phase parallel to […]
The Antaris 7.5 in Lower Saxony
Another Antaris 7.5 kW installed on a 12m tilting mast in Lower Saxony. The commissioning could take place in the best weather. Special thanks for the beautiful photo with sunset! Respect and recognition for the project carried out in-house. The wind turbine could be installed without a procedure, as the freedom of procedure applies up […]
The Antaris 7.5 kW in Finland
And yes, they still exist, the individualists, and that’s a good thing. Our customer has installed an Antaris 7.5 kW on a 20m high hydraulic mast in Finland. Below you can see the sauna building, with a direct view of the lake. The Antaris works in 3-phase parallel to the grid with the FIMER Trio […]
Our visit to Schleswig-Holstein!
The Antaris 12kW on an 18m high mast in SH. https://braun-windturbinen.com/…/antaris…/antaris-12-kw Currently, this wind turbine is running with the Smart!wind. The neighbor, however, receives the new Smart!wind+, the Antaris 12 is already installed. https://smart-power-electronics.de/smartwind Do you have any questions or would you like to know more about the Antaris 12 kW? We will be happy […]
And it goes on in Bavaria…
Here, the Antaris 5.5 kW with the repeller diameter D4.40 m is installed on a 15m high tipping mast in Bavaria. https://braun-windturbinen.com/…/antari…/antaris-5-5-kw The Antaris works in 3 phases parallel to the TRIO 5.8. Safety: PLC wind, V DC monitoring, helicopter function, Generator CK7.5 kW If you have any questions about the project, please contact us, […]
The ANTARIS 12 kW in Serbia
Here the Antaris 12 kW was installed on an 18m high lattice mast. The wind turbine works in 3-phase parallel to the grid with the PVS 10 from FIMER: https://braun-windturbinen.com/produkte/wind-wechselrichter/ The installation was carried out by the guys from: https://telefon-inzenjering.co.rs/ .Thank you and respect for performance! The usual safety parameters for the Antaris 12 are […]
Here is another installation in Lower Saxony
15m total height is procedure-free in NS. The Antaris 7.5 kW is here on a 12m tipping machineten installed. The wind turbine works with the TRIO 7.5 from FIMER in 3-phase parallel to the grid. (https://braun-windturbinen.com/produkte/wind-wechselrichter/) https://braun-windturbinen.com/…/antari…/antaris-7-5-kw Wind monitoring via PLC, as well as V DC monitoring and helicopter function keep the Antaris safe in […]
And it continues in Schleswig-Holstein
Here the Antaris 5.5 kW with the repeller D4.40m on a 9.20m tilting mast. The Antaris works here in 3-phase parallel to the grid with the TRIO 5.8 from FIMER. Our customer fought bravely for 1.5 years for his building permit. And yes, almost exactly to the day with the commissioning of the wind turbines, […]
Let’s continue with the installations – this time in NL
Here the Antaris 5.5 kW with the repeller D4.40m https://braun-windturbinen.com/…/antari…/antaris-5-5-kw The wind turbine is installed on a 12m high lattice mast. The mast can be tilted on site and via the jut tree. The Antaris 5.5 works in 3-phase parallel to the TRIO 5.5. The Antaris serves as a student project here: https://www.hanze.nl/de The installation […]
Assembly setup of the Antaris 5.5 kW in Lower Saxony!
Here the Antaris 5.5 kW was installed on the 12m high wooden mast “Dali Tower”. The wind turbine could be set up without any procedure, as no building permit is required in NS up to 15m total height (repeller sheet above). The Antaris 5.5 works here in 3-phase parallel to the grid with the FIMER […]