A breath of fresh air in Lower Saxony!
The Antaris 7.5 is installed on a farm – and now supplies clean, reliable wind power directly from its own field! Mounted on a 12 m tipping mast, it remains procedure-free with a total height of 15 m – without any approval stress. The TRIO 7.5 from FIMER takes care of the grid feed-in – […]
The summer break is over!
Success all along the line – the ANTARIS 7.5 now also in Bavaria! We are celebrating a very special installation: Our ANTARIS 7.5 kW has been successfully put into operation on a 12 m tilting mast in Bavaria – a strong statement for clean, independent energy! https://braun-windturbinen.com/produkte/antaris-kleinwindanlagen/antaris-7-5-kw/ A huge thank you to our dedicated customer, […]
Joy of the wind – now also in Denmark!
It is with great pleasure that we are pleased to present another successful project: In Denmark, an Antaris 7.5kW wind turbine was installed on an 18 m high, hydraulically lowerable tubular mast – an impressive step towards sustainable energy! In combination with photovoltaics and the powerful FIMER PVS 10, the system works in an island […]
The Antaris 7.5 in Lower Saxony
Another Antaris 7.5 kW installed on a 12m tilting mast in Lower Saxony. The commissioning could take place in the best weather. Special thanks for the beautiful photo with sunset! Respect and recognition for the project carried out in-house. The wind turbine could be installed without a procedure, as the freedom of procedure applies up […]
The Antaris 7.5 kW in Finland
And yes, they still exist, the individualists, and that’s a good thing. Our customer has installed an Antaris 7.5 kW on a 20m high hydraulic mast in Finland. Below you can see the sauna building, with a direct view of the lake. The Antaris works in 3-phase parallel to the grid with the FIMER Trio […]
The journey continues in 2025! – New ANTARIS 7.5 kW wind turbines in Hesse
In 2025, the development of decentralized energy generation will continue – in Hesse, three Antaris 7.5 kW wind turbines were recently successfully installed, each on a 7.0 m high mast. The Antaris wind turbines offer an efficient and reliable way to harness wind energy and create a powerful hybrid system with the integrated solar system. […]
The Antaris 7.5 kW installed in the Spessart
The Antaris was built and installed here on a 7.0m high mast (procedure-free) on its own. Just in time to make the most of the dark and windy season. https://braun-windturbinen.com/…/antari…/antaris-7-5-kw Respect and recognition for it, after all, was the 1st facility. The Antaris works here in 3-phase parallel to the grid with the TRIO 7.5 […]
Here is another installation in Lower Saxony
15m total height is procedure-free in NS. The Antaris 7.5 kW is here on a 12m tipping machineten installed. The wind turbine works with the TRIO 7.5 from FIMER in 3-phase parallel to the grid. (https://braun-windturbinen.com/produkte/wind-wechselrichter/) https://braun-windturbinen.com/…/antari…/antaris-7-5-kw Wind monitoring via PLC, as well as V DC monitoring and helicopter function keep the Antaris safe in […]
And again an Antaris installed!
The Antaris 7.5 kW (https://braun-windturbinen.com/…/antari…/antaris-7-5-kw/) works here on a 19 m mast in Lower Saxony. A special feature here is the on-site hydraulic tilting mast. Respect for that, you can feel the enthusiasm for the project. The Antaris 7.5 works in 3 phases parallel to the TRIO 7.5. The usual safety parameters are as follows: […]
ANTARIS Turbines are producing electrical Energy for Africa
The ANTARIS 7.5 kW wind turbine is working in an hybrid system with PV on a 12 m lifting monopole tower. The complete system is working with 3 Sunny Islands, 2 Sunny Tripower and 1 Smartwind 7.5. If you have questions concerning that project, please feel free to contact us. https://www.braun-windturbinen.com/know-how-en/insular-systems/ We produce energy for […]