And it goes on in Bavaria…
Here, the Antaris 5.5 kW with the repeller diameter D4.40 m is installed on a 15m high tipping mast in Bavaria. https://braun-windturbinen.com/…/antari…/antaris-5-5-kw The Antaris works in 3 phases parallel to the TRIO 5.8. Safety: PLC wind, V DC monitoring, helicopter function, Generator CK7.5 kW If you have any questions about the project, please contact us, […]
And again installed an Antaris
Here the Antaris 5.5 kW was installed on a 12m tilting mast in North Rhine-Westphalia. https://braun-windturbinen.com/…/antari…/antaris-5-5-kw Our verifiable mast documents with foundation plan have been approved via test statics. In addition, the customer has added a soil survey to confirm the foundation information including reinforcement. The Antaris works in 3 phases parallel to the TRIO […]
And it continues in Schleswig-Holstein
Here the Antaris 5.5 kW with the repeller D4.40m on a 9.20m tilting mast. The Antaris works here in 3-phase parallel to the grid with the TRIO 5.8 from FIMER. Our customer fought bravely for 1.5 years for his building permit. And yes, almost exactly to the day with the commissioning of the wind turbines, […]
Let’s continue with the installations – this time in NL
Here the Antaris 5.5 kW with the repeller D4.40m https://braun-windturbinen.com/…/antari…/antaris-5-5-kw The wind turbine is installed on a 12m high lattice mast. The mast can be tilted on site and via the jut tree. The Antaris 5.5 works in 3-phase parallel to the TRIO 5.5. The Antaris serves as a student project here: https://www.hanze.nl/de The installation […]
Assembly setup of the Antaris 5.5 kW in Lower Saxony!
Here the Antaris 5.5 kW was installed on the 12m high wooden mast “Dali Tower”. The wind turbine could be set up without any procedure, as no building permit is required in NS up to 15m total height (repeller sheet above). The Antaris 5.5 works here in 3-phase parallel to the grid with the FIMER […]
The 2018 season has already started
The ANTARIS 5.5 kW on a 10m high tilting mast.The system works on an ostrich farm in Bulgaria in 3-phase parallel to the grid.The diameter of the repeller is 4.0 m. The CK7.5 kW generator was installed.The Smart!wind SW5.5 is installed here as a wind inverter. If you have any questions about the project, please […]
Another ANTARIS 5.5 kW installed in Poland
First there was a chinese turbine installed, but always the same procedure.Now the client installed an ANTARIS 5.5 kW windturbine and is very happy now.The turbine is working 3-phased grid connected with a Smartwind SW 5.5 kW. If you have more questions concerning that project, please feel free to contact us. Enjoy the wind with […]
October 2009
One of the ANTARIS 5.5 kW wind turbines has generated the remarkable amount of 68.0 kWh of clean wind power within 24 hours at a site in Ireland (22.10.2009). Remarkably, the repeller diameter is 3.5 m.
December 2009
All ANTARIS 5.5 kW turbines produced up to 68 kWh of clean wind power per day at exposed locations in Portugal in December. In Portugal, one of the 3.5 kW turbines has achieved an annual yield of 4,600 kWh, while the solar power plant with the same output has a yield of 3,900 kWh. You […]
Current performance data + trade fair “new energy husum 2011”
ANTARIS 5.5 kW with only 3.5 m repeller produced in Cork IE 8.000 kWh in 16 months; Hub height 12 m ANTARIS 2.5 kW with 3.0 m Repeller produces 5000 kWh in Schleswig Holstein in 18 months; Hub height 12 m ANTARIS wind turbines at the “new energy husum 2011” trade fair” Our local sales […]