Successful installation of the Antaris 12 kW in Saxony on a 24m mast!
In the Free State of Saxony, the Antaris 12 kW now stands on an impressive 24m mast! The installation was carried out in-house by our customer, Seilerei Voigt. Respect and recognition for that! Here you can find more information about the Voigt rope factory: https://www.seilerei-voigt.de The Antaris 12 kW works here in 3-phase parallel to […]
The Antaris 12 kW installed in Baden-Württemberg
Here is another installation of the Antaris 12 kW on a 24 m mast in BW. The scope of the permit includes a soil survey, the tested mast statics and the bat control. The Antaris 12 kW works in 3-phase parallel to the grid with heating support and thus supplies a farm with electricity and […]
The ANTARIS 12 kW in Serbia
Here the Antaris 12 kW was installed on an 18m high lattice mast. The wind turbine works in 3-phase parallel to the grid with the PVS 10 from FIMER: https://braun-windturbinen.com/produkte/wind-wechselrichter/ The installation was carried out by the guys from: https://telefon-inzenjering.co.rs/ .Thank you and respect for performance! The usual safety parameters for the Antaris 12 are […]
The Antaris 12 kW in Schleswig-Holstein!
Here, both Antaris 12 kW wind turbines are now working on 18m masts in the immediate vicinity. In the wind turbine currently installed, the Smart!wind+ was installed with the TRIO 10 kW from SMA. The rear one still works with the Smart!wind. Both wind turbines operate in 3-phase parallel to the grid. The usual safety […]
The summer break is over!
With a breath of fresh air on the repeller, the installations continue. Some of them are posted here. Currently it is the installation of the Antaris 12 kW on an 18m mast in SH. And yes, now both neighbors have their Antaris 12 kW wind turbines at the start and are happy about the kWh […]
ANTARIS wind turbines, built to meet the highest demands!
The ANTARIS 12 kW is installed here on a 12m tilting mast, procedure-free in Lower Saxony. https://braun-windturbinen.com/…/antaris…/antaris-12-kw The wind turbine works in 3-phase parallel to the PVS 10 kW from FIMER, here is the link: https://www.fimer.com/…/dreiphasige…/pvs-1012515-tl The usual safety parameters for the Antaris 12 are as follows: PLC wind, V DC monitoring, helicopter function. In […]
The ANTARIS 12 kW has a new partner!
After the Smart!wind inverter was discontinued and is therefore no longer manufactured, it has now taken some time until the ANTARIS 12 kW has a new “partner”. As with the other systems in the ANTARIS series, an inverter from the manufacturer FIMER is now also installed here. It is the FIMER PVS 10kW (link to […]