15m total height is procedure-free in NS.
The Antaris 7.5 kW is here on a 12m tipping machine
ten installed.
The wind turbine works with the TRIO 7.5 from FIMER in 3-phase parallel to the grid.
(https://braun-windturbinen.com/produkte/wind-wechselrichter/)
https://braun-windturbinen.com/…/antari…/antaris-7-5-kw
Wind monitoring via PLC, as well as V DC monitoring and helicopter function keep the Antaris safe in the wind even in violent storms.
The CK11 generator (11.0 kW) takes over the braking function.
Network surplus can be dissipated into domestic water heat, for example, via various smart monitoring systems.
Excess energy >7.5 kW is converted into heat and dissipated via the 6.5 kW braking resistor.
Please do not install it on a flammable surface!
Even if no soil survey is required for procedural freedom, here is our recommendation to all future “ANTARIS Windmüller”:
In case of unclear ground conditions, always have it checked to be on the safe side.
This can be done if necessary. the local civil engineer.
If you have any questions about the project, please contact us, we will be happy to advise you.
Joy of the wind with Antaris wind turbines!
