And again an Antaris installed!
The Antaris 7.5 kW (https://braun-windturbinen.com/…/antari…/antaris-7-5-kw/) works here on a 19 m mast in Lower Saxony. A special feature here is the on-site hydraulic tilting mast. Respect for that, you can feel the enthusiasm for the project. The Antaris 7.5 works in 3 phases parallel to the TRIO 7.5. The usual safety parameters are as follows: […]
The Antaris 3.5 in France!
Here, the Antaris 3.5 kW works on a 12m high tilting mast. The wind turbine works in 1-phase parallel to the grid with the UNO 4.0 kW, in a hybrid system with a PV system. The installation was carried out by our distributor for FR: https://www.diwatt.fr/ If you have any questions about the project, please […]
Finally an Antaris installed in Portugal again
It’s been a while since the last ANTARIS was set up in PT, so we are happy about the current installation. It is the ANTARIS 4.5 kW as a 48V DC battery charger. The wind turbine is installed on a 7.0m high tilting mast in the rather hilly interior of the country and is used […]
The ANTARIS 12 kW has a new partner!
After the Smart!wind inverter was discontinued and is therefore no longer manufactured, it has now taken some time until the ANTARIS 12 kW has a new “partner”. As with the other systems in the ANTARIS series, an inverter from the manufacturer FIMER is now also installed here. It is the FIMER PVS 10kW (link to […]
Francis turbine in Bavaria goes online!
With a lot of dedication, enthusiasm and an eye for detail, the installation of the Francis turbine has now been successfully completed. Respect for the successful work and expertise! https://de.wikipedia.org/wiki/Francis-Turbine On the electrical side, the CK7.5 generator (7.5kW) was installed as an energy supplier. This works with approx. 600rpm @ 5.0 kW in continuous operation. […]
The Antaris 5.5 kW on a lattice mast!
Here, the Antaris was installed on a customer’s own 12m high lattice mast. The larger repeller diameter of D4.40m (15.2m²) was installed. The Antaris wind turbine works in 3-phase parallel to the grid with the TRIO 5.8 from FIMER. The inverters are not only installed in the Antaris wind turbines, but are also used in […]
The small wind turbine ANTARIS 7.5 in Bavaria
Yes, that’s how they are our customers. Even in winter, they are busy assembling, despite the snow and cold. Here the construction of the Antaris 7.5 kW is carried out on a 7.0m tilting mast. The plant is less than 10m total height and therefore procedure-free. The Antaris 7.5 kW works in 3-phase parallel to […]
A good start to 2024 and always a fresh breeze on the Repeller!
Here the time “between the years” was used to give the blades of the Antaris 5.5 kW with the repeller diameter D5.30 a serrated band. The background was the attempt to minimize the repeller noise. In addition, the winglets have been removed. Both together then brought a significant reduction in the repeller noise. Whether it […]
Merry Christmas and a Happy New Year 2024
Dear customers, We would like to thank you very much for the good and extremely successful cooperation, as well as your trust in 2023. Of course, this also applies to our suppliers. Thank you for the trusting cooperation! Special thanks also go to all those who delighted us with their gifts. I wish you all […]
The Antaris 7.5 kW in Lower Saxony!
The Antaris 7.5 kW works here near Hamburg on a 12m tilting mast. The mast is also erected here via jut boom and towing rope. The wind turbine could be built without any procedure, as no building permit is required up to a total height of 15m. The 12m mast has a verifiable statics including […]