The Antaris 7.5 in Lower Saxony
Another Antaris 7.5 kW installed on a 12m tilting mast in Lower Saxony. The commissioning could take place in the best weather. Special thanks for the beautiful photo with sunset! Respect and recognition for the project carried out in-house. The wind turbine could be installed without a procedure, as the freedom of procedure applies up […]
The Antaris 7.5 kW in Finland
And yes, they still exist, the individualists, and that’s a good thing. Our customer has installed an Antaris 7.5 kW on a 20m high hydraulic mast in Finland. Below you can see the sauna building, with a direct view of the lake. The Antaris works in 3-phase parallel to the grid with the FIMER Trio […]
Our visit to Schleswig-Holstein!
The Antaris 12kW on an 18m high mast in SH. https://braun-windturbinen.com/…/antaris…/antaris-12-kw Currently, this wind turbine is running with the Smart!wind. The neighbor, however, receives the new Smart!wind+, the Antaris 12 is already installed. https://smart-power-electronics.de/smartwind Do you have any questions or would you like to know more about the Antaris 12 kW? We will be happy […]
Merry Christmas and a successful New Year!
The year is coming to an end, and we look back on an exciting and eventful time. Together, we have overcome challenges, initiated new projects and developed sustainable solutions for the future. In the contemplative Christmas season, we would like to thank our suppliers and customers very much – for your trust, cooperation and support. […]
The last Antaris wind turbine installed for 2024
The Antaris 5.5 kW (D4.40 m) was built here near Gothenburg in Sweden on a 12 m high wooden mast by the company Innoventum. The wind turbine works in 3-phase parallel to the grid with the FIMER Trio 5.8. As always, the Antaris 5.5 has the well-known safety parameters installed: PLC wind, V DC monitoring, […]
And it goes on in Bavaria…
Here, the Antaris 5.5 kW with the repeller diameter D4.40 m is installed on a 15m high tipping mast in Bavaria. https://braun-windturbinen.com/…/antari…/antaris-5-5-kw The Antaris works in 3 phases parallel to the TRIO 5.8. Safety: PLC wind, V DC monitoring, helicopter function, Generator CK7.5 kW If you have any questions about the project, please contact us, […]
And again installed an Antaris
Here the Antaris 5.5 kW was installed on a 12m tilting mast in North Rhine-Westphalia. https://braun-windturbinen.com/…/antari…/antaris-5-5-kw Our verifiable mast documents with foundation plan have been approved via test statics. In addition, the customer has added a soil survey to confirm the foundation information including reinforcement. The Antaris works in 3 phases parallel to the TRIO […]
The Antaris 2.5 kW @ 48V DC
Here, the Antaris was installed on a 7.0 m high tilting mast in Mecklenburg-Western Pomerania without any procedures. https://braun-windturbinen.com/…/antari…/antaris-2-5-kw The wind turbine feeds into a 48V DC battery block. When the adjustable max. V DC (e.g. 57V) is reached, the Antaris is slowed down to a standstill via a 3.0 kW brake resistor. This protects […]
The Antaris 7.5 kW installed in the Spessart
The Antaris was built and installed here on a 7.0m high mast (procedure-free) on its own. Just in time to make the most of the dark and windy season. https://braun-windturbinen.com/…/antari…/antaris-7-5-kw Respect and recognition for it, after all, was the 1st facility. The Antaris works here in 3-phase parallel to the grid with the TRIO 7.5 […]
The ANTARIS 12 kW in Serbia
Here the Antaris 12 kW was installed on an 18m high lattice mast. The wind turbine works in 3-phase parallel to the grid with the PVS 10 from FIMER: https://braun-windturbinen.com/produkte/wind-wechselrichter/ The installation was carried out by the guys from: https://telefon-inzenjering.co.rs/ .Thank you and respect for performance! The usual safety parameters for the Antaris 12 are […]