With the ANTARIS 2.5 kW, the customer finally has a functioning small wind turbine
With the severe weather conditions on the island, quality is needed. In this project, too, the original system was damaged and has now been replaced by an ANTARIS 2.5 kW . The already installed grid inverter (ABB-PVI-3.6) can continue to be used, the Powercurve has been adapted. The ANTARIS 2.5 kW thus operates in 1-phase […]
Assembly setup at the Polish border
Our customer has a total of 3 ANTARIS wind turbines built. 2 of them are the ANTARIS 7.5 kW on an 18 m mast each.The systems operate in an off-grid system with a Sunny Island inverter. See also the following link:https://braun-windturbinen.com/knowhow/inselbetrieb/ The other system is an ANTARIS 2.5 kW and works as a 48V DC […]
Well, that was a short summer break
In the meantime, 2 more Antaris 3.5 kW turbines have been installed by our partner in Belgium.Link: http://www.sillelec.com/ The turbines both operate in 1-phase parallel to the grid, each with an ABB-PVI 3.6 kW wind inverter.The 3.5 kW braking resistor and the turbine control ensure safe plant operation at a mast height of 10 m. […]
BRAUN Wind Turbines has successfully tested the new ABB TRIO inverters for wind
Already in autumn 2017 we were informed about the discontinuation of the ABB/PO wind inverters.We immediately got to work with our partner to look for alternatives.With success, thanks to courageous commitment and also with the support of ABB.After about 8 months of development work, the new TRIO solar inverters for wind are available.The wind parameters […]
And again another ANTARIS 10kW goes into operation
The ANTARIS works here on a 24m high tubular mast and is 3-phase on the grid with self-consumption.It is used to supply electricity to the customer’s own commercial enterprise.The system is maintained by us free of charge via remote maintenance.In addition to the wind sensor for system monitoring, a bat box is also installed, see […]
Another ANTARIS 10kW starts operation!
The ANTARIS 10kW works here on a 24m high tubular mast and is 3-phase on the grid with self-consumption.In addition, service water is heated via a 6.0kW heating element.The system is maintained by us free of charge via remote maintenance.We carry out the customer’s requests for changes to the set performance parameters (mains / heating) […]
BRAUN Wind Turbines has successfully tested the new ABB DM inverters for wind!
Already in autumn 2017 we were informed about the discontinuation of the ABB/PO wind inverters.We immediately got to work with our partner to look for alternatives.With success, thanks to courageous commitment and also with the support of ABB.After about 6 months of development work, the new DM solar inverters for wind are available.The wind parameters […]
ANTARIS 3.5 kW and 2.5 kW Wind Turbines installed in France!
Another finished installations in France, done from our Partner DIWATT.https://www.diwatt.fr/The turbines are working 1-phased grid connected with ABB/PO Inverter on customers designed monopole towers.https://www.braun-windturbinen.com/products/wind-inverter/ If you have more questions concerning those projects, please feel free to contact us.https://www.braun-windturbinen.com/products/antaris-small-wind-turbines/antaris-3-5-kw/ Enjoy the wind with ANTARIS Windturbines!
Successful self-built layout, respect for that!
With a lot of dedication and above all passion, our customer has built his own wind turbine here.The complete repeller D3.5m, the generator CK3.5, as well as the feed-in electronics were supplied by us.Of course, all this with our technical support during planning and construction. If you have any questions about the project, please give […]
Another Antaris wind turbine was built on the border with the Czech Republic
The ANTARIS 3.5 kW works here on an 11 m high lattice mast in heating mode.The heating control system works characteristically guided by a 6.0 kW heating element.The repeller blades are black to allow for faster defrosting in the event of frost in winter. If you have any questions about the project, please call us.We […]