The ANTARIS 7.5 kW in France
The wind turbine works here on a customer-owned mast on which another small wind turbine was previously mounted.The ANTARIS 7.5 kW supplies the building in 3-phase parallel to the grid with the Smart!wind SW7.5.In addition to the wind speed, the wind direction is also measured here, of course with devices from Thies Clima. Many thanks […]
In the Allgäu, too, people are happy about the ANTARIS wind turbines!
The ANTARIS 10 kW was built here on a 15m mast.According to the building authority, the mast had to be shortened from 18m to 15m, including the color specification.One can certainly discuss the meaningfulness of this requirement, but oh well.The ANTARIS works here in 3-phase parallel to the grid and supplies the farm with clean […]
The ANTARIS 2.5 kW at the landfill
The smallest wind turbine of the ANTARIS series was installed here on a landfill site in Brandenburg. The system works here on a 7.0m high tilting mast as a 48V DC battery charger. The special feature here is that the mast does not have a concrete foundation but a steel foundation. This is called “Steelroots” […]
The ANTARIS 5.5 kW – Spoiled by the sun
In Sicily, the ANTARIS 5.5 kW operates on a 15m high lattice mast.The system works here in 1-phase parallel to the grid with the ABB-UNO-DM.6.0 kW inverter.Here is the link to it:https://braun-windturbinen.com/produkte/wind-wechselrichter/Our installer:http://www.unikaenergia.it/contattaci/ If you have any questions about the project, please give us a call! Joy of the wind with ANTARIS wind turbines.
The ANTARIS 2.5 kW in the USA
The ANTARIS 2.5 kW works here in Illinois USA at a hub height of 33m. The mast is a self-built by our customer, respect for that. The project is an off-grid solution with the Tristar 600(https://www.morningstarcorp.com/de/products/tristar-mppt-600v-de/) and the Xantrex battery inverter as an off-grid manager.(http://www.xantrex.com/power-products/battery-chargers/overview.aspx) The ANTARIS works with 100-500V DC. If you have any […]
Assembly structure of the ANTARIS at an altitude of over 5,000 m
2 ANTARIS wind turbines 2.5 kW serve as electricity supplier for the ALMA project in Chile.A particular challenge during the assembly work is the very thin air at this height.Respect and recognition to the VIVEST team in Chile! https://fis-landschaft.de/universum/alma/https://www.eso.org/public/germany/about-eso/?lang If you have any questions about the project, please give us a call! Joy of the […]
“Made in Germany” for Chile
Joy of the wind with ANTARIS wind turbines.
With the approaching spring, the first ANTARIS wind turbines will also be erected
The ANTARIS 7.5 kW was installed here on a customer’s own 20m mast.The wind turbine works in 3-phase parallel to the grid and with heating support (6.0 kW heating element). The following has been set for this system:1. Up to 2.0 kW to your own home grid2. Then on the 6.0 kW heating element3. Then […]
BRAUN Windturbinen GmbH wishes you a happy new year and all the best for 2019
Below is the yield overview 2018 of 3 pieces (2×10 kW, 1×7.5 kW) of ANTARIS wind turbines! In the video you can see the ANTARIS 7.5 kW with a hub height of 15 m, as well as the corresponding 3-phase Smart!wind inverter. The system works here parallel to the grid under full load and a […]
With the ANTARIS 2.5 kW, the customer finally has a functioning small wind turbine
With the severe weather conditions on the island, quality is needed. In this project, too, the original system was damaged and has now been replaced by an ANTARIS 2.5 kW . The already installed grid inverter (ABB-PVI-3.6) can continue to be used, the Powercurve has been adapted. The ANTARIS 2.5 kW thus operates in 1-phase […]