The ANTARIS 7.5 kW produces electricity and heat in Schleswig-Holstein!
Here, the Antaris wind turbine works on a 12 m high tilting mast in 3-phase parallel to the grid for the self-supply of electricity and heating support with a 6.0 kW heating element.The system is hoisted up with a winch, over a jut tree as a deflection point.Since the small wind turbine is subject to […]
The ANTARIS 12 kW in the Borken district
The existing wind turbine was dismantled here and replaced by the ANTARIS 12 kW.A matching mast adapter was supplied right away and everything fit wonderfully during assembly, much to the delight of the customer.The hub height is thus 26m.Our customer (https://www.elektrokass.de/) has installed it himself, respect and recognition for it.The system works in 3-phase parallel […]
The ANTARIS 3.5 kW in Sweden
Here the ANTARIS 3.5 kW works on a 12m high wooden mast “Dali Performance” installed in Sweden. The system operates off-grid in a 3-phase hybrid system with Sunny Island. The system was installed by the company Innoventum, Mr. Daligault: Thanks to Julien for his perfect Job! If you have any questions about the project, please […]
The ANTARIS 2.5 kW installed in Belgium
Even in times of pandemic, the ANTARIS wind turbines continue to be installed. This time in Belgium, on a 12m tilting mast. The system works here in 1-phase parallel to the grid with an ABB-UNO-3.3 wind inverter. On the photos you can see the wind inverter with brake resistor, as well as an additional “stop […]
Water march, renovation work successfully completed
The Pelton turbine works here with a “Windy Boy 2500” grid inverter in 1-phase parallel to the grid.The adjustable characteristic curve in the Windy Boy enables optimum energy yield from the turbine.Via a separate control system including brake resistor, the 3-phase generator voltage is rectified and transmitted to the inverter.The remarkable smoothing of the geno […]
The ANTARIS 7.5 kW in northern France
The ANTARIS 7.5 kW was set up here on an 11m high tilting mast.In France, 12m hub height is procedure-free.The mast is laid via hydraulics. The system works in 3-phase parallel to the grid with the Smart!wind SW7.5 kW.https://smart-power-electronics.de/smart-windWhen measuring the wind, the wind direction is also displayed here. Mast design, incl. hydraulics, as well […]
Funding for small wind turbines by the Federal Ministry
Federal Ministry of Food and Agriculture also supports small wind turbines in the field of agriculture and horticulture! Take advantage of the opportunity of 40% funding until 30.06.2021. If you have any questions about the project, please call here! https://braun-windturbinen.com/kontakt/ Joy of the wind with ANTARIS wind turbines. Directive-Funding-Energy-Efficiency-2020-1
Water wheel back in operation!
After some setbacks, the water wheel system has now been successfully put back into operation.The overshot wheel has a diameter of D6.0m. The maximum power is 5.8kW and is limited by the water inlet with integrated bypass.(https://www.planet-schule.de/sf/multimedia-interaktive-animationen-detail.php?projekt=wasserraeder)The system works with the Smart!wind SW5.5, 3-phase parallel to the grid.In the event of a power failure or […]
The ANTARIS 5.5 kW in Baden-Württemberg 2020
The ANTARIS 5.5 kW was built here on a 9.2m high tilting mast and is therefore procedure-free in BW (permit-free up to 10m hub height).The system works here in 3-phase parallel to the grid with the Smart!wind SW5.5. The repeller diameter installed here is D4.40m.In addition, a bat control system has been installed here, see […]
The ANTARIS 5.5 kW in Bavaria!
The Antaris 5.5 kW was built here on a 7.0m high tilting mast and is therefore procedure-free in Bavaria (permit-free up to 10m total height). The system works here in 3-phase parallel to the grid with the Smartwind SW5.5. Excess power is currently burned via a 6.0 kW brake resistor. Later, a 6.0 kW heating […]