Here is another installation in Lower Saxony
15m total height is procedure-free in NS. The Antaris 7.5 kW is here on a 12m tipping machineten installed. The wind turbine works with the TRIO 7.5 from FIMER in 3-phase parallel to the grid. (https://braun-windturbinen.com/produkte/wind-wechselrichter/) https://braun-windturbinen.com/…/antari…/antaris-7-5-kw Wind monitoring via PLC, as well as V DC monitoring and helicopter function keep the Antaris safe in […]
The summer break is over!
With a breath of fresh air on the repeller, the installations continue. Some of them are posted here. Currently it is the installation of the Antaris 12 kW on an 18m mast in SH. And yes, now both neighbors have their Antaris 12 kW wind turbines at the start and are happy about the kWh […]
ANTARIS wind turbines, built to meet the highest demands!
The ANTARIS 12 kW is installed here on a 12m tilting mast, procedure-free in Lower Saxony. https://braun-windturbinen.com/…/antaris…/antaris-12-kw The wind turbine works in 3-phase parallel to the PVS 10 kW from FIMER, here is the link: https://www.fimer.com/…/dreiphasige…/pvs-1012515-tl The usual safety parameters for the Antaris 12 are as follows: PLC wind, V DC monitoring, helicopter function. In […]
The ANTARIS 2.5 in Spitsbergen
The two ANTARIS 2.5 kW supply the research station in Spitsbergen with wind power. https://www.awi.de/…/stationen/awipev-forschungsbasis.html https://braun-windturbinen.com/…/antari…/antaris-2-5-kw The built-in inverter is the 1-phase UNO 3.3 from FIMER: https://braun-windturbinen.com/produkte/wind-wechselrichter If you have any questions about the project, please contact us, we will be happy to advise you. Joy of the wind with ANTARIS wind turbines!
And we continue with the ANTARIS 10 kW in France
Here, the Antaris 10 kW is built on a 12m high hydraulic tilting mast. The mast was designed by our distributor in FR: https://www.diwatt.fr/. The guys also did the complete installation, thanks for that. The wind turbine works in 3-phase parallel to the grid with the Smart!wind SW10. Since the inverter has been discontinued, the […]
Let’s continue with the installations – this time in NL
Here the Antaris 5.5 kW with the repeller D4.40m https://braun-windturbinen.com/…/antari…/antaris-5-5-kw The wind turbine is installed on a 12m high lattice mast. The mast can be tilted on site and via the jut tree. The Antaris 5.5 works in 3-phase parallel to the TRIO 5.5. The Antaris serves as a student project here: https://www.hanze.nl/de The installation […]
And again an Antaris installed!
The Antaris 7.5 kW (https://braun-windturbinen.com/…/antari…/antaris-7-5-kw/) works here on a 19 m mast in Lower Saxony. A special feature here is the on-site hydraulic tilting mast. Respect for that, you can feel the enthusiasm for the project. The Antaris 7.5 works in 3 phases parallel to the TRIO 7.5. The usual safety parameters are as follows: […]
The Antaris 3.5 in France!
Here, the Antaris 3.5 kW works on a 12m high tilting mast. The wind turbine works in 1-phase parallel to the grid with the UNO 4.0 kW, in a hybrid system with a PV system. The installation was carried out by our distributor for FR: https://www.diwatt.fr/ If you have any questions about the project, please […]
Finally an Antaris installed in Portugal again
It’s been a while since the last ANTARIS was set up in PT, so we are happy about the current installation. It is the ANTARIS 4.5 kW as a 48V DC battery charger. The wind turbine is installed on a 7.0m high tilting mast in the rather hilly interior of the country and is used […]
The small wind turbine ANTARIS 7.5 in Bavaria
Yes, that’s how they are our customers. Even in winter, they are busy assembling, despite the snow and cold. Here the construction of the Antaris 7.5 kW is carried out on a 7.0m tilting mast. The plant is less than 10m total height and therefore procedure-free. The Antaris 7.5 kW works in 3-phase parallel to […]