New Blade profile
From the second quarter of 2008, there is a new blade profile for repellers with a diameter of 3,5 meters. The profile permits the even more efficient generation of power at a wind speed of four to six m/sec. First field test have already proven this. The minimisation of sound results from blades endowed with […]
Wind farm in Portugal
In Portugal, the first wind park with 40 ANTARIS wind turbines, whose operation takes place in parallel with a network, is presently developing. Each machine provides 3.6 kW. Completion is to take place until the end of 2008.
Generators as low-speed motors
By reason of a growing demand for low-speed generators, BRAUN Windturbinen GmbH produces PMG ́s reaching 125 VDC at about 50 rpm. The power is 2.5 kW at an overcharge-capability of 100%. They will be available by mid-October 2008.
ANTARIS as a turbine for weak wind situations
From the fourth quarter of 2009, ANTARIS will as well be available as a turbine for weak wind with repeller ́s diameters of 4.0 to 4.5 meters and 5.5 kW performance. The construction of the generator is 16-pin, does not have gear and brushes and is free of maintenance and detent torque at 5.5 kW […]
Story about Micropower – our partner in UK
RioMicropower-EN
New ANTARIS Small Wind Turbine installed
Location: Westerwald,Hub height: 15 m; average wind speed 3.4 m/s; Commissioning 03.12.2010 Access to Sunny WebBox
Current field tests on ANTARIS wind turbine generators
At present there are two field tests on the small-sized ANTARIS wind turbine generator in Denmark and Austria. field test in Denmark with the ANTARIS 5.5 kW unit 4.40 m and 5.10 m rotor field test in Lichtenegg, Austria with the ANTARIS 3.5 kW unit (3.50 m) and 5.5 kW unit (5.10 m) On 11.01.2011 […]
BRAUN Wind Turbines Facebook Page
BRAUN Windturbinen GmbH now has its very own page on Facebook. There you have the opportunity to interact with us, to pass on your opinion and suggestions and to keep informed.
ANTARIS wind turbine generator available as marine version
ANTARIS wind turbine generators are now also available in a marine version: generator housing anodised, primed and double coated; all aluminium parts on the rotor are resistant to sea water, anodised and powder coated; all steel parts are high-temperature galvanised; on request they can also be powder coated in addition; all bolted joints of stainless […]
News about ANTARIS Wind Turbines
ANTARIS 5.5 kW unit with a rotor of only 3.5 m produced in Cork, Ireland. 8000 kWh in 16 months; Hub height 12 m ANTARIS 2.5 kW unit with 3.0 m rotor produced in Schleswig Holstein. 5000 kWh in 18 months; Hub height 12 m ANTARIS Wind Turbines at the “new energy husum 2011” Exhibition.