The last Antaris wind turbine installed for 2024
The Antaris 5.5 kW (D4.40 m) was built here near Gothenburg in Sweden on a 12 m high wooden mast by the company Innoventum. The wind turbine works in 3-phase parallel to the grid with the FIMER Trio 5.8. As always, the Antaris 5.5 has the well-known safety parameters installed: PLC wind, V DC monitoring, […]
The Antaris 12 kW installed in Baden-Württemberg
Here is another installation of the Antaris 12 kW on a 24 m mast in BW. The scope of the permit includes a soil survey, the tested mast statics and the bat control. The Antaris 12 kW works in 3-phase parallel to the grid with heating support and thus supplies a farm with electricity and […]
And it goes on in Bavaria…
Here, the Antaris 5.5 kW with the repeller diameter D4.40 m is installed on a 15m high tipping mast in Bavaria. https://braun-windturbinen.com/…/antari…/antaris-5-5-kw The Antaris works in 3 phases parallel to the TRIO 5.8. Safety: PLC wind, V DC monitoring, helicopter function, Generator CK7.5 kW If you have any questions about the project, please contact us, […]
And again installed an Antaris
Here the Antaris 5.5 kW was installed on a 12m tilting mast in North Rhine-Westphalia. https://braun-windturbinen.com/…/antari…/antaris-5-5-kw Our verifiable mast documents with foundation plan have been approved via test statics. In addition, the customer has added a soil survey to confirm the foundation information including reinforcement. The Antaris works in 3 phases parallel to the TRIO […]
The Antaris 7.5 kW installed in the Spessart
The Antaris was built and installed here on a 7.0m high mast (procedure-free) on its own. Just in time to make the most of the dark and windy season. https://braun-windturbinen.com/…/antari…/antaris-7-5-kw Respect and recognition for it, after all, was the 1st facility. The Antaris works here in 3-phase parallel to the grid with the TRIO 7.5 […]
The ANTARIS 12 kW in Serbia
Here the Antaris 12 kW was installed on an 18m high lattice mast. The wind turbine works in 3-phase parallel to the grid with the PVS 10 from FIMER: https://braun-windturbinen.com/produkte/wind-wechselrichter/ The installation was carried out by the guys from: https://telefon-inzenjering.co.rs/ .Thank you and respect for performance! The usual safety parameters for the Antaris 12 are […]
Assembly assembly Antaris 2.5 kW in Potsdam!
The Antaris 2.5 kW is installed here on a 10m high wooden pole “Giraffe” from the company INNOVENTUM https://innoventum.se/en/wind-power/. https://braun-windturbinen.com/…/antari…/antaris-2-5-kw The Antaris works in 1-phase parallel to the grid with the UNO 3.3 (FIMER) in a hybrid system with the installed PV system, mounted on the “back of the giraffe”. If you have any questions […]
The Antaris 12 kW in Schleswig-Holstein!
Here, both Antaris 12 kW wind turbines are now working on 18m masts in the immediate vicinity. In the wind turbine currently installed, the Smart!wind+ was installed with the TRIO 10 kW from SMA. The rear one still works with the Smart!wind. Both wind turbines operate in 3-phase parallel to the grid. The usual safety […]
Here is another installation in Lower Saxony
15m total height is procedure-free in NS. The Antaris 7.5 kW is here on a 12m tipping machineten installed. The wind turbine works with the TRIO 7.5 from FIMER in 3-phase parallel to the grid. (https://braun-windturbinen.com/produkte/wind-wechselrichter/) https://braun-windturbinen.com/…/antari…/antaris-7-5-kw Wind monitoring via PLC, as well as V DC monitoring and helicopter function keep the Antaris safe in […]
The summer break is over!
With a breath of fresh air on the repeller, the installations continue. Some of them are posted here. Currently it is the installation of the Antaris 12 kW on an 18m mast in SH. And yes, now both neighbors have their Antaris 12 kW wind turbines at the start and are happy about the kWh […]