Joy of the wind – now also in Denmark!

It is with great pleasure that we are pleased to present another successful project: In Denmark, an Antaris 7.5kW wind turbine was installed on an 18 m high, hydraulically lowerable tubular mast – an impressive step towards sustainable energy! In combination with photovoltaics and the powerful FIMER PVS 10, the system works in an island […]
A new wind is blowing in Saxony!

It is with great pleasure that we can announce: Another Antaris 5.5 kW wind turbine has been successfully installed – on a 12 meter high lattice mast in the middle of Saxony! More about the facility: https://braun-windturbinen.com/produkte/antaris-kleinwindanlagen/antaris-5-5-kw/ Previously, there was another wind turbine here, which unfortunately was never able to develop its full potential. But […]
A new milestone in Portugal!

It is with great pleasure that we can announce: At a beautiful hotel complex in Portugal, an Antaris 12 kW wind turbine now stands on a 12 meter tilting mast – ready to deliver clean energy! Thanks to the excellent work of our partner Iontech, the installation was perfectly implemented. The Antaris 12 kW feeds […]
Successful installation of the Antaris 12 kW in Saxony on a 24m mast!

In the Free State of Saxony, the Antaris 12 kW now stands on an impressive 24m mast! The installation was carried out in-house by our customer, Seilerei Voigt. Respect and recognition for that! Here you can find more information about the Voigt rope factory: https://www.seilerei-voigt.de The Antaris 12 kW works here in 3-phase parallel to […]
The Antaris 7.5 in Lower Saxony

Another Antaris 7.5 kW installed on a 12m tilting mast in Lower Saxony. The commissioning could take place in the best weather. Special thanks for the beautiful photo with sunset! Respect and recognition for the project carried out in-house. The wind turbine could be installed without a procedure, as the freedom of procedure applies up […]
The Antaris 7.5 kW in Finland

And yes, they still exist, the individualists, and that’s a good thing. Our customer has installed an Antaris 7.5 kW on a 20m high hydraulic mast in Finland. Below you can see the sauna building, with a direct view of the lake. The Antaris works in 3-phase parallel to the grid with the FIMER Trio […]
The journey continues in 2025! – New ANTARIS 7.5 kW wind turbines in Hesse

In 2025, the development of decentralized energy generation will continue – in Hesse, three Antaris 7.5 kW wind turbines were recently successfully installed, each on a 7.0 m high mast. The Antaris wind turbines offer an efficient and reliable way to harness wind energy and create a powerful hybrid system with the integrated solar system. […]
Merry Christmas and a successful New Year!

The year is coming to an end, and we look back on an exciting and eventful time. Together, we have overcome challenges, initiated new projects and developed sustainable solutions for the future. In the contemplative Christmas season, we would like to thank our suppliers and customers very much – for your trust, cooperation and support. […]
The last Antaris wind turbine installed for 2024

The Antaris 5.5 kW (D4.40 m) was built here near Gothenburg in Sweden on a 12 m high wooden mast by the company Innoventum. The wind turbine works in 3-phase parallel to the grid with the FIMER Trio 5.8. As always, the Antaris 5.5 has the well-known safety parameters installed: PLC wind, V DC monitoring, […]
The Antaris 12 kW installed in Baden-Württemberg

Here is another installation of the Antaris 12 kW on a 24 m mast in BW. The scope of the permit includes a soil survey, the tested mast statics and the bat control. The Antaris 12 kW works in 3-phase parallel to the grid with heating support and thus supplies a farm with electricity and […]