Here the Antaris 5.5 kW was installed on the 12m high wooden mast “Dali Tower”.
The wind turbine could be set up without any procedure, as no building permit is required in NS up to 15m total height (repeller sheet above).
The Antaris 5.5 works here in 3-phase parallel to the grid with the FIMER TRIO 5.8 kW.
https://braun-windturbinen.com/produkte/wind-wechselrichter/
Due to the rather low mast height, the repeller D4.40m was installed, which increases the repeller area by 2.63m².
Wind monitoring is carried out via a wind sensor installed on the mast and a PLC installed in the cabinet.
Additional fuse parameters are a V DC voltage monitoring system and the helicopter function.
The wooden poles were made here.
https://innoventum.se/dali-performance/
If you have any questions about the project, please contact us, we will be happy to advise you.
Joy of the wind with Antaris wind turbines!
