Here, the Antaris 10 kW is built on a 12m high hydraulic tilting mast.
The mast was designed by our distributor in FR: https://www.diwatt.fr/.
The guys also did the complete installation, thanks for that.
The wind turbine works in 3-phase parallel to the grid with the Smart!wind SW10.
Since the inverter has been discontinued, the 3-phase PVS 10 from FIMER will be installed in the future: https://www.fimer.com/…/dreiphasige…/pvs-1012515-tl
The usual safety parameters on the Antaris 10 are as follows:
PLC wind speed, V DC monitoring, helicopter function.
In addition, the Antaris 10 has a braking box installed.
When the braking process has been initiated, a generator short circuit takes place at an adjustable speed in order to set the wind turbine absolutely.
The CK18 generator, an 18kW machine, is installed.
And yes, the quality standard still applies to us: Made in Germany!
If you have any questions about the project, please contact us, we will be happy to advise you.
Joy of the wind with Antaris wind turbines!
