The ANTARIS wind turbine works here on a 24m mast in 3-phase parallel to the grid and with heating support.
Here, 3.0 kW is set to the house grid, then to the 6.0 kW heating element in the service water tank.
The system manager here is the Smart!wind SW7.5; https://braun-windturbinen.com/produkte/wind-wechselrichter/
The customer took over the assembly and assembly completely on his own, respect and recognition for that!
The test structural engineer accepted the individual foundation with special dimensions and reinforcement, as well as the 24m masts for wind zone 4.
To reduce mast noise, they have all welded gusset plates at certain points on the inside, which reduces the shell vibration of the mast.
Furthermore, the wall thickness of the mast is 1mm thicker than statically necessary, which also further reduces the mast noise.
Quality “Made in Germany”!
If you have any questions about the project, please give us a call!
Joy of the wind with ANTARIS wind turbines.
