ANTARIS as a turbine for weak wind situations
From the fourth quarter of 2009 ANTARIS will as well be available as a turbine for weak wind with repeller´s diameters of 4.0 to 4.5 meters and 5.5 kW performance. The construction of the generator is 16-pin, does not have gear and brushes and is free of maintenance and detent torque at 5.5 kW / […]
Story about Micropower – our partner in UK
RioMicropower-EN
New ANTARIS Small Windturbine installed
Location: Westerwald, Hub height: 15 m; average wind speed 3.4 m/s; Commissioning 03.12.2010 Access to Sunny WebBox
Current field tests on ANTARIS wind turbine generators
At present there are two field tests on the small-sized ANTARIS wind turbine generator in Denmark and Austria. field test in Denmark with the ANTARIS 5.5 kW unit 4.40 m and 5.10 m rotor field test in Lichtenegg, Austria with the ANTARIS 3.5 kW unit (3.50 m) and 5.5 kW unit (5.10 m) On 11.01.2011 […]
BRAUN Wind Turbines Facebook Page
BRAUN Windturbinen GmbH now has its very own page on Facebook. There you have the opportunity to interact with us, to pass on your opinion and suggestions and to keep informed.
ANTARIS wind turbine generator available as marine version
ANTARIS wind turbine generators are now also available in a marine version: generator housing anodised, primed and double coated; all aluminium parts on the rotor are resistant to sea water, anodised and powder coated; all steel parts are high-temperature galvanised; on request they can also be powder coated in addition; all bolted joints of stainless […]
News about ANTARIS Windturbines
ANTARIS 5.5 kW unit with a rotor of only 3.5 m produced in Cork, Ireland. 8000 kWh in 16 months; Hub height 12 m ANTARIS 2.5 kW unit with 3.0 m rotor produced in Schleswig Holstein. 5000 kWh in 18 months; Hub height 12 m ANTARIS Wind Turbines at the „new energy husum 2011“ Exhibition.
ANTARIS Windturbine Denmark
Video ANTARIS Windturbine Denmark
School project ANTARIS 5.5 kW
performed by students of the Lycée du Nord à Wiltz in Luxembourg. http://www.youngenergy.lu
ANTARIS treetop wind turbine
Wolfgang Frey, an architect from Freiburg, enters the wind power debate with treetop wind turbines. He installed an ANTARIS 3.5 kW small wind turbine on a Douglas-fir that was 30 metres high as a pilot plant in Freiamt in the district of Emmendingen. A legal loophole in the rules on authorisation makes this possible.