ANTARIS 5.5 kW

[vc_row][vc_column width=“1/2″][vc_column_text]

Technical Specifications ANTARIS 5.5 kW

Generator

• Permanent-magnet rotor, brushless, gearless, maintenance-free
• Extremely strong permanent magnets for a high level of efficiency
• (NdFeBo permanent magnets, resistent to temperatures up to 150° C)
• Special ball bearings for reliably taking up radial and axial forces
• 3-phase current
• Separate rectifier
• Either direction of rotation
• Voltage 0-1000 VDC
• Start of feed-in at approx. 100 rpm
• Power: 6000 watts at 380 rpm and 400 VDC
• Evenly rising power curve
• Weight: 57 kg
• Aluminium housing, surface cooling, base anchoring
• Gondola housing in GRP
• Protection class IP56

Rotor

• Hub connection with aluminium flange and pressure-relief plate
• Stainless-steel screw connections with locknuts
• Three rotor blades in Carbon
• Computer-designed aerodynamic profile
• Special blade design to minimise noise
• Approx. 4.00 m in diamater; for low Wind with 4.40 m or 5.30 m diameter up to 10.0 m Mastheight!
• Weight of each blade: approx. 7.0 kg
• Dynamically and statically balanced
• Direction of rotation anticlockwise viewed from front
• Max. rotational speed 350 rpm
• GRP spinner cap
• Rotor colour to client specification

Support element comprising:

• Wind vane (weatherproof HDPE, off-white, slightly transparent)
• Square hot galvanized steel tube as support element
• All screw connections in stainless steel and fitted with locknuts
• Steel bracket as support for generator, configured for plug-in connection with azimuth bearing, fully galvanised
• Protected by patented rotor-blade positioning system
• Mast adapter with flange connector (tube 114.3 mm)

Storm protection

• Rotor-blade positioning (“helicopter position”)
• Voltage monitoring with braking resistance
• Generator short-circuit

Control cabinet

• Control system with Turbine Power Curve
• 3-phased grid-feed in with FIMER / TRIO 5.8 kW;
  optional 1-phased with 1 x FIMER / UNO 5.0 kW
• Control electronics with 3-phased turbine controller
• Connections / plug connectors protected against polarity reversal
• Controlling of the 3 alternator phases during turbinemode
• Reset switch with key (removable)
• Emergency-OFF switch
• 6.0 kW braking resistance
• Rectifier, display etc.

The Antaris is, of course, also available as a battery charger, 48 VDC, with a power output of 4000 W. The relevant rotational-speed diagrams for battery charging / grid-connected operation will be included in our quotation.[/vc_column_text][/vc_column][vc_column width=“1/2″][vc_column_text]
ANTARIS 5.5 kW

ANTARIS 5.5 kW Power curve

Sound level measurement from the ANTARIS Windturbine 30m from the mast[/vc_column_text][vc_column_text]
ANTARIS 5.5 kW Powercontrolling via Webinterface (Turbinepower @ 10.8m/s Windspeed)[/vc_column_text][vc_column_text]
The ANTARIS 4.5 kW as 48 VDC Battery charger in action, with max. Power of 5.5 kW![/vc_column_text][/vc_column][/vc_row]