{"id":18488,"date":"2020-11-27T11:45:07","date_gmt":"2020-11-27T09:45:07","guid":{"rendered":"https:\/\/braun-windturbinen.com\/water-wheel-back-in-operation\/"},"modified":"2025-04-08T18:44:31","modified_gmt":"2025-04-08T16:44:31","slug":"water-wheel-back-in-operation","status":"publish","type":"post","link":"https:\/\/braun-windturbinen.com\/en\/water-wheel-back-in-operation\/","title":{"rendered":"Water wheel back in operation!"},"content":{"rendered":"\n

After some setbacks, the water wheel system has now been successfully put back into operation.
The overshot wheel has a diameter of D6.0m. The maximum power is 5.8kW and is limited by the water inlet with integrated bypass.
(https:\/\/www.planet-schule.de\/sf\/multimedia-interaktive-animationen-detail.php?projekt=wasserraeder<\/a>)
The system works with the Smart!wind SW5.5, 3-phase parallel to the grid.
In the event of a power failure or mains fault, the energy is directed to a 6.0 kW resistor and the system continues to rotate normally according to the set characteristic curve.
This means that over-tightening of the water wheel in the event of a mains failure \/ fault is not possible and safe operation is guaranteed.
The system is permanently monitored with a 24\/7 mini PC. <\/p>\n\n

If you have any questions about the project, please give us a call!<\/em><\/p>\n\n

\n
\"\"<\/a><\/figure>\n\n\n\n
\"\"<\/a><\/figure>\n\n\n\n
\"\"<\/a><\/figure>\n\n\n\n
\"\"<\/a><\/figure>\n\n\n\n
\"\"<\/a><\/figure>\n\n\n\n
\"\"<\/a><\/figure>\n\n\n\n
\"\"<\/a><\/figure>\n<\/figure>\n\n